Trigno Spring Contact
For indwelling EMG recording
The Trigno™ Spring Contact Adapter gives users the ability to collect indwelling, fine wire EMG through the robust Trigno™ system. Delsys makes no assertions or recommendations on the type of recording electrode to use, or the method of its application. This responsibility befalls the electrode manufacturer, the client performing the study and the Institutional Review Board overseeing the study.

Spring Contacts
Custom connectors
Up to 850 Hz bandwidth
Up to 40 m range
Specifications
Sensor Channels
1x EMG, up to 6x IMU
Reference Type
Dual on-board stabilizing reference
Inter-Electrode Spacing
User Defined
Size (Body)
27 x 46 x 13 mm
Size (Head)
23 x 30 x 7 mm
Mass
25 g
Operating Range
40 m in RF mode
Host Dependent/unlimited datalogger
Wireless Protocol
-2.400-2.483 GHz ISM Band, Proprietary RF Protocol
-BLE V4.2
EMG Bandwidths
10-850 Hz
20-450 Hz
EMG Sampling Rate (Max)
4370 s/sec
Accelerometer Sampling Rate (Max)
963 sa/sec
Gyroscope Sampling Rate (Max)
741 sa/sec
Orientation Sampling Rate (Max)
222 sa/sec
Sensor Resolution
16 bits
EMG Baseline Noise (typical)
750 nV
EMG Input Range
11 mV / 22 mV rti
CMRR
<-80 dB
Battery Life
Up to 8 hours
Recharge Time (typical)
2.5 hours
Inter-Sensor Latency
< 1 sampling period
EMG Analog Output Delay
48 ms Fixed
ACC/Gyro Analog Output Delay
96 ms Fixed
On-Board EMG Filter
-Butterworth bandpass (40/80 dB/dec)
-RMS Envelope Calculation (100 ms window)
Real-Time IMU Orientation Filter
Quaternions or RPY (selectable)
Material
Medical Grade Polycarbonate
Seal and Protection
UV-sealed to prevent moisture from entering the sensor & to enhance patient safety
Patents
Protected by one or more of the following Patents 6480731, 6238338, 6440067, 9351559, 8971983, EP1070479