Trigno 4-Channel FSR Adapter
Designed to provide relative pressure information of body-contact surfaces
Each sensor transmits 4 independent analog signals, each servicing an individual FSR (Force Sensitive Resistor) membrane. These thin membranes are often affixed to shoe inserts for recording foot pressure timing at the heel, the toe, the first and the fifth metatarsals. Alternatively, these same sensors can be used to assess grip force during grasping tasks, or pressure distribution on the back while seated or lying down.

Identify the timing of significant events
Make relative amplitude comparisons
Available sizes: 0.2” circle diameter, 0.5” circle diameter and 1.5” square
Up to 40 m range
2.4 GHz transmission
Specifications
Sensor Channels
4x FSR, up to 6x IMU
Size (Body)
27 x 46 x 13 mm
Mass
19 g
Operating Range
40 m in RF mode
Host Dependent/unlimited datalogger
Wireless Protocol
-2.400-2.483 GHz ISM Band, Proprietary RF Protocol
-BLE V4.2
FSR Bandwidths
DC-50 Hz
FSR Sampling Rate (Max)
1111 sa/sec
Accelerometer Sampling Rate (Max)
741 sa/sec
Gyroscope Sampling Rate (Max)
741 sa/sec
Orientation Sampling Rate (Max)
74 sa/sec
Sensor Resolution
16 bits
Battery Life
Up to 8 hours
Recharge Time (typical)
2.5 hours
Inter-Sensor Latency
< 1 sampling period
EMG Analog Output Delay
48 ms Fixed
ACC/Gyro Analog Output Delay
96 ms Fixed
Real-Time IMU Orientation Filter
Quaternions or RPY (selectable)
Material
Medical Grade Polycarbonate
Seal and Protection
UV-sealed to prevent moisture from entering the sensor & to enhance patient safety
Patents
Protected by one or more of the following Patents 6480731, 6238338, 6440067, 9351559, 8971983, EP1070479